Publikationen 2019

Beck, A., Werner, N., Zibek, S. (2019) Chapter 4 – Mannosylerythritol Lipids: Biosynthesis, Genetics, and Production Strategies. In Douglas G. Hayes;Daniel K. Y. Solaiman; Richard D. Ashby (Ed.), Biobased Surfactants: Synthesis, Properties, and Applications (121−167). London: Academic Press and AOCS Press.
https://doi.org/10.1016/B978-0-12-812705-6.00004-6

Rais, D., Zibek, S. (2019) Biotechnological and biochemical utilization of lignin. In Kurt Wagemann; Nils Tippkötter (Ed.), Biorefineries (Vol 166, Advances in Biochemical Engineering/Biotechnology, 469−518). Cham: Springer International Publishing. https://doi.org/10.1007/10_2017_6

Adatia, K., Keller, S., Götz, T., Tovar, G. E. M., Southan, A. (2019) Hydrogels with multiple clickable anchor points: synthesis and characterization of poly(furfuryl glycidyl ether)-block-poly(ethylene glycol) macromonomers. Polymer Chemistry 10, 4485−4494. DOI: 10.1039/c9py00755e

Atanasova, P., Atanasov, V., Wittum, L., Southan, A., Choi, E., Wege, C., Kerres, J., Eiben, S., Bill, J. (2019) Hydrophobization of tobacco mosaic virus to control the mineralization of organic templates. Nanomaterials 9(5), 800.
https://doi.org/10.3390/nano9050800

Barz, J., Haupt, M., Oehr, C., Hirth, T., Grimmer, P. (2019) Stability and water wetting behavior of superhydrophobic polyurethane films created by hot embossing and plasma etching and coating. Plasma Processes and Polymers
16(6), 1800214. http://dx.doi.org/10.1002/ppap.201800214

Beck, A., Haitz, F., Grunwald, S., Preuss, L., Rupp, S., Zibek, S. (2019) Influence of microorganism and plant oils on the structure of mannosylerythritol lipid (MEL) biosurfactants revealed by a novel thin layer chromatography mass
spectrometry method. Journal of Industrial Microbiology and Biotechnology 46, 1191–1204. http://dx.doi.org/10.1007/s10295-019-02194-2

Brand, H. v. d., Bongers, W. A., Stober, J. K., Kasparek, W., Wagner, D., Doelman, N., Klop, W., Giannone, L., Reich, M., Westerhof, E., de Baar, M. R., the ASDEX Upgrade team and the EUROfusion MST1 team. (2019) Inline ECE
measurements for NTM control on ASDEX Upgrade. Nuclear Fusion 59(1). https://doi.org/10.1088/1741-4326/aaeea9

Buck, F., Kistner, I., Rösler, C., Schulz, A., Walker, M., Tovar, G. E. M., Schiestel, T. (2019) Einsatz von perowskitischen Hohlfasermembranen in einem Mikrowellenplasma. Chemie Ingenieur Technik 91(8), 1117−1122.
https://doi.org/10.1002/cite.201900048

Claaßen, C., Rebers, L., Claaßen, M. H., Borchers, K., Tovar, G. E. M., Southan, A. (2019) Expanding the range of available isoelectric points of highly methacryloylated gelatin. Macromolecular Chemistry and Physics 220(14),
Art. 1900097. http://dx.doi.org/10.1002/macp.201900097

Dehli, F., Rebers, L., Stubenrauch, C., Southan, A. (2019) Highly ordered gelatin methacryloyl hydrogel foams with tunable pore size. Biomacromolecules 20(7), 2666−2674. https://doi.org/10.1021/acs.biomac.9b00433

Derwenskus, F., Metz, F., Gille, A., Schmid-Staiger, U., Briviba, K., Schließmann, U., Hirth, T. (2019) Pressurized extraction of unsaturated fatty acids and carotenoids from wet Chlorella vulgaris and Phaeodactylum tricornutum biomass using subcritical liquids. GCB Bioenergy 11(1), 335−344. https://doi.org/10.1111/gcbb.12563

Eiben, S., Koch, C., Altintoprak, K., Southan, A., Tovar, G. E. M., Laschat, S., Weiss, I. M., Wege, C. (2019) Plant virus-based materials for biomedical applications: Trends and prospects. Advanced Drug Delivery Reviews 145, 96−118. https://doi.org/10.1016/j.addr.2018.08.011

Funk, C., Raschbichler, V., Lieber, D., Wetschky, J., Arnold, E., Leimser, J., Biggel, M., Friedel, C. C., Ruzsics, Z., Bailer, S. (2019) Comprehensive analysis of nuclear export of herpes simplex virus type 1 tegument proteins and their Epstein-Barr virus orthologs. Traffic 20(7), 152−167. https://doi.org/10.1111/tra.12627

Gille, A., Stojnic, B., Derwenskus, F., Trautmann, A., Schmid-Staiger, U., Posten, C., Briviba, K., Palou, A., Bonet, M. L., Ribot, J. (2019) A lipophilic fucoxanthin-rich Phaeodactylum tricornutum extract ameliorates effects of diet-induced obesity in C57BL/6J mice. Nutrients 11(4), Art. 796. https://doi.org/10.3390/nu11040796

Hahn, T., Nothacker, M., Kövilein, A., Beck, A., Zibek, S. (2019) Stirrer speed adaption is beneficial for liquefaction of cellulose. Chimica Oggi-Chemistry Today 37(6), 22−25.

Holdmann, C., Schmid-Staiger, U., Hirth, T. (2019) Outdoor microalgae cultivation at different biomass concentrations − Assessment of different daily and seasonal light scenarios by modeling. Algal Research 38, Art. 101405. https://doi.org/10.1016/j.algal.2018.101405

Huber, B., Hoch, E., Calderon, I., Borchers, K., Kluger, P. (2019) A versatile perfusion bioreactor and endothelializable photo cross-linked tubes of gelatin methacryloyl as promising tools in tissue engineering. Biomedizinische
Technik 64(4), 397−406. DOI: 10.1515/bmt-2018-0015

Köhn, A., Austin, M. E., Brookman, M. W., Gentle, K. W., Guidi, L., Holzhauer, E., La Haye, R. J., Leddy, J. B., Maj, O., Petty, C. C., Poli, E., Snicker, A., Thomas, M. B., Vann, R. G. L., Weber, H. (2019) The deteriorating effect of plasma density fluctuations on microwave beam quality. EPJ Web of Conferences 203. https://doi.org/10.1051/epjconf/201920301005

Krutkin, O. L., Altukhov, A. B., Gurchenko, A. D., Gusakov, E. Z., Irzak, M. A., Esipov, L. A., Sidorov, A.V., Chôné, L., Kiviniemi, T. P., Leerink, S. Niskala, P. Lechte, C., Heuraux, S., Zadvitskiy, G. (2019) Validation of full-f global gyrokinetic modeling results against the FT-2 tokamak Doppler reflectometry data using synthetic diagnostics. Nuclear Fusion 59(9). https://doi.org/10.1088/1741-4326/ab1cfb

Krutkin, O. L., Gusakov, E. Z., Heuraux, S., Lechte, C. (2019) Nonlinear Doppler reflectometry power response. Analytical predictions and full-wave modelling. Plasma Physics and Controlled Fusion 61(4), Art. 045010. https://
doi.org/10.1088/1361-6587/ab0236

Liewald, M., Tovar, G. E. M., Wörz, C., Umlauf, G. (2019) Tribological conditions using CO2 as volatile lubricant in dry metal forming. International Journal of Precision Engineering and Manufacturing-Green Technology. https://doi.org/10.1007/s40684-019-00069-6

Moseev, D., Stejner, M., Stange, T., Abramovic, I., Laqua, H. P., Marsen, S., Schneider, N., Braune, H., Hoefel U., Kasparek W., Korsholm S. B., Lechte C., Leipold F., Nielsen S. K., Salewski M., Rasmussen, J., Weißgerber M.,
Wolf, R. C. (2019) Collective Thomson scattering diagnostic at Wendelstein 7-X. Review of Scientific Instruments 90, Art. 013503. https://doi.org/10.1063/1.5050193

Nellinger, S., Keller, S., Southan, A., Wittmann, V., Volz, A.-C., Kluger,P. J. (2019) Generation of an azide-modified extracellular matrix by adipose-derived stem cells using metabolic glycoengineering. Current Directions in Biomedical Engineering 5(1), 393−396. https://doi.org/10.1515/cdbme-2019-0099

Neumann, U., Derwenskus, F., Flister, V. F., Schmid-Staiger, U., Hirth, T., Bischoff, S. C. (2019) Fucoxanthin, a carotenoid derived from Phaeodactylum tricornutum exerts antiproliferative and antioxidant activities in vitro.
Antioxidants 8(6), Art. 183. https://doi.org/10.3390/antiox8060183

Novosel, E., Borchers, K., Kluger, P., Mantalaris, A., Matheis, G., Pistolesi, M., Schneider, J., Wenz, A., Lelkes, P. (2019) New approaches to respiratory assist: Bioengineering an ambulatory, miniaturized bioartificial lung. ASAIO
journal (American Society for Artificial Internal Organs) 65(5), 422−429. ISSN:1538-943X

Rebers, L., Granse, T., Tovar, G. E. M., Southan, A., Borchers, K. (2019) Physical interactions strengthen chemical gelatin methacryloyl gels. Gels 5(1), Art. 4. https://doi.org/10.3390/gels5010004

Riehle, N., Thude, S., Kandelbauer, A., Tovar, G. E. M., Lorenz, G. (2019) Synthesis of soft polysiloxane-urea elastomers for intraocular lens application. Journal of visualized experiments (JoVE) 145. DOI: 10.3791/58590

Schuster, F., Hirth, T., Weber, A. (2019) Reactive inkjet printing of polyethylene glycol and isocyanate based inks to create porous polyurethane structures. Journal of Applied Polymer Science 136(3), Art. 46977. https://doi.org/10.1002/
app.46977

Seibert-Ludwig, D., Hahn, T., Hirth, T., Zibek, S. (2019) Selection and optimization of a suitable pretreatment method for miscanthus and poplar raw material. GCB Bioenergy 11(1), 171−180. https://doi.org/10.1111/gcbb.12575

Shendi, D., Marzi, J., Linthicum, W., Rickards, A. J., Dolivo, D. M., Keller, S., Kauss, M. A., Wen, Q., McDevitt, T. C., Dominko, T., Schenke-Layland, K., Rolle, M. W. (2019) Hyaluronic acid as a macromolecular crowding agent for
production of cell-derived matrices. Acta Biomaterialia 100, 292−305. https://doi.org/10.1016/j.actbio.2019.09.042

Solano-Piedra, R., López-Rodríguez, D., Köhn, A., Vargas, V. I., Rojas-Quesada, M. A., Coto-Vilchez, F., Mora, J. Asenjo, J. (2019) Microwave heating scenarios using a full wave code on SCR-1 Stellarator. IEEE, 2017 16th Latin American Workshop on Plasma Physics (LAWPP). DOI: 10.1109/LAWPP.2017.8692192

Stier, S., Rebers, L., Schönhaar, V., Hoch, E., Borchers, K. (2019) Advanced formulation of methacryl- and acetyl-modified biomolecules to achieve independent control of swelling and stiffness in printable hydrogels. Journal of Materials Science: Materials in Medicine 30(3), Art. 35). https://doi.org/10.1007/s10856-019-6231-0

Volz, A.-C., Omengo, B., Gehrke, S. A., Kluger, P. (2019) Comparing the use of differentiated adipose-derived stem cells and mature adipocytes to model adipose tissue in vitro. Differentiation 110, 19−28. https://doi.org/10.1016/j.
diff.2019.09.002

Zahedi, E., Woerz, C., Reichardt, G., Umlauf, G., Liewald, M., Barz, J., Weber, R., Foerster, D. J., Graf, T. (2019) Lubricant-free deep drawing using CO2 and N2 as volatile media injected through laser-drilled microholes. Manufacturing Review 6, Art. 11. https://doi.org/10.1051/mfreview/2019011

Balk, M., Jin, J., Endermann, M., Schneider, J., Baumgärtner, K.-M., Pauly, S., Merli, S., Schulz, A., Walker, M. Tovar, G. E. M. (2019) Microwave Plasma Sources for High-rate Applications. IMPI's 53rd Annual Microwave Power
Symposium, June 2019, Las Vegas, Nevada, USA.

Conway, G. D., Lechte, C., Poli, E., Maj, O. and the ASDEX Upgrade Team (2019) Recent progress in modelling the resolution and localization of Doppler reflectometry measurements. In Proceeding of the 14th International Reflectometry Workshop (IRW14), May 2019.

Fanale, F., Bruschi, A., Darcourt, O., Farina, D., Figini, L., Gandini, F., Hernderson, M., Hunt, R., Moro, A., Platania, P., Plaum, B. (2019) Quasi-Optical design of ECRH mirrors for ITER first plasma operations. In Proceeding of the 44th International Conference on Infrared, Millimeter, and Terahertz Waves, September 2019, Paris, France.

Köhn, A., Holzhauer, E. (2019) The depolarizing effect of plasma density fluctuations on microwave beams. Proceeding of the 46th EPS Conference on Plasma Physics, Milan, Italy, 2019 (Vol. 43C, P4.1078).

Lechte, C., Conway G. D., Görler, T., Happel, T. and the ASDEX Upgrade Team (2019) Fullwave Doppler reflectometry simulations for turbulence spectra using GENE and IPF-FD3D. In Proceeding of the 14th International Reflectometry Workshop (IRW14), May 2019.

Merli, S., Schulz, A., Walker, M. (2019) Hochrateabscheidung von Schutzbeschichtungen mit einem Mikrowellenplasma. 14. ThGOT Thementage Grenz- und Oberflächentechnik und 6. Kolloquium Dünne Schichten in der Optik, March 2019, Zeulenroda-Triebes, Germany, ISBN 978-3-00-058187-8.

Müller, R., Baumgärtner, K.-M., Balk, M., Schneider, J., Merli, S., Schulz, A., Walker, M., Tovar, G. (2019) Functional coatings deposited from low-pressure microwave plasmas. IMPI's 53rd Annual Microwave Power Symposium, June
2019, Las Vegas, Nevada.

Pauly, S., Schulz, A., Walker, M., Gorath, M., Baumgärtner, K.-M., Tovar, G. E.M. (2019) Modelling and study of a microwave plasma source for high-rate etching. AMPERE 2019 (17th International Conference on Microwave and
High Frequency Heating. Editorial Universitat Politècnica de València). http://dx.doi.org/10.4995/Ampere2019.2019.9757

Plaum, B. (2019) Simulation of microwave beams with PROFUSION. Technical report, IGVP, University of Stuttgart, February 2019.

Rebers, L., Borchers, K., Hoch, E., Stier, S., Schönhaar, V., Weber, Achim (2019) Printable glycosaminoglycan graded gelatin methacryloyl acetyl hydrogel, NIP & Digital Fabrication Conference, Printing for Fabrication 2019, 48−51. https://doi.org/10.2352/ISSN.2169-4451.2019.35.48

Ullmann, T., Schmid, B., Manz, P., Ramisch, M. (2019) Shrinking of resonant manifold under flow shear at the stellarator TJ-K. Proceeding of the 46th EPS Conference on Plasma Physics, Milan, Italy, 2019 (Vol. 43C, P5.1064).

Troia, M., Schulz, A., Walker, M. (2019) Non-destructive test for the analysis of defects in thin barrier films. 14. Thementage Grenz- und Oberflächentechnik und 6. Optik-Kolloquium, March 2019, Zeulenroda-Triebes, Germany.

Wagner, D., Stober, J., Kircher, M., Leuterer, F., Monaco, F., Münich, M., Schubert, M., Zohm, H., Gantenbein, G., Jelonnek, J., Thumm, M., Meier, A., Scherer, T., Strauss, D., Kasparek, W., Lechte, C., Plaum, B., Zach, A., Litvak,
A. G., Denisov, G. G., Chirkov, A., Malygin, V., Popov, L. G., Nichiporenko, V. O., Myasnikov, V. E., Tai, E. M., Solyanova, E. A. and the ASDEX Upgrade team (2019) Completion of the 8 MW multi-frequency ECRH system at ASDEX
upgrade. In Proceeding of the 44th International Conference on Infrared, Millimeter, and Terahertz Waves, September 2019, Paris, France.

Baron Nunez, F.-W., Zibek, S. (2019) Intensification of the of downstream processing of Mannosylerythritol lipids. Himmelfahrtstagung 2019, Intensification and digitalisation for integral bioprocessing, May 27−29, 2019, Hamburg, Germany.

Baron-Nunez, F. W., Zibek, S. (2019) Prospective strategies for downstream process of mannosylerythritol lipids. Biosurfactants Conference, September 25−27, 2019, Stuttgart-Hohenheim, Germany.

Beck, A., Grunwald, S., Preuss, L., Radermacher, S., Kövilein, A., Rupp, S., Zibek, S. (2019) Microbial production of mannosylerythritol lipids (MEL) from lignocellulosic feedstock. 4. Statusseminar: Forschungsprogramm Bioökonomie Baden-Württemberg, January 8, 2019, Stuttgart-Hohenheim, Germany.

Beck, A., Zibek, S. (2019) Bioreactor production of the microbial glycolipid mannosylerythritol lipid (MEL) from renewable resources. 15th International Conference on Renewable Resources & Biorefineries (RRB-15), June 3−5,
2019, Toulouse, France.

Brebeck, G., Mühlemeier, I., Stier, M., Schließmann, U., Hirth, T. (2019) Development of a bioreactor for the utilization of biogas as a feedstock. 4. Statusseminar: Forschungsprogramm Bioökonomie Baden-Württemberg, January 8, 2019, Stuttgart-Hohenheim, Germany.

Brookman, M. W., Köhn, A., Martin, E. H., Thomas, M. B., La Haye, R. J., Woodward, D. J. L., Leddy, J. B., Peysson, Y., Yan, Z., Barada, K., Rhodes, T., Lau, C. H., Vann, R. G. L., Austin, M. E. (2019) Transport fitting of modulated
power measurements resolves RF beam scattering. 24th Joint US-EU Transport Task Force Meeting, March 18−21, 2019, Austin, Texas, USA.

Brookman, M. W., Köhn, A., Thomas, M. B., Holland, L., La Haye, R. J., Leddy, J. B., Peysson, Y., Yan, Z., Barada, K., Rhodes, T., Vann, R. G. L., Austin, M. E. (2019) Microwave scattering due to density fluctuations in the DIII-D
Tokamak. 61st Annual Meeting of the APS Division of Plasma Physics, October 21−25, 2019, Fort Lauderdale, Florida, USA.

Dehli, F., Rebers, L., Stubenrauch, C., Southan, A. (2019) Highly ordered gelatin methacryloyl hydrogel foams with tunable pore sizes. 33rd Conference of the European Colloid and Interface Society, September 8−13, 2019, Leuven,
Belgium.

Derwenskus, F., Schmid-Staiger, U., Schließmann, U., Hirth, T. (2019) Microalgae biorefinery – cascaded fractionation of microalgae ingredients for food and feed applications. 4. Statusseminar: Forschungsprogramm Bioökonomie Baden-Württemberg, January 8, 2019, Stuttgart-Hohenheim, Germany.

D'Isa, F., Hecimovic, A., Carbone, E., Fantz, U., Kistner, I., Schulz, A., Walker, M., Tovar, G. E. M. (2019) Characterisation of a 2.45 GHz microwave atmospheric pressure plasma torch in N2 and CO2. DPG-Frühjahrstagung,
March 17−22, 2019, Munich, Germany.

Gorke, O., Tovar, G. E. M., Southan, A. (2019) Synthesis of water-soluble furan-functionalized polyelectrolytes and polyelectrolyte networks. Frontiers in Polymer Science, May 5−8, 2019, Budapest, Hungary.

Grübel, J. (2019) Functionalisation of polymers with isothiouronium groups for improved biointegration of implant materials. ProMatLeben – Polymere. September 3–4, 2019, Berlin, Germany.

Kistner, I., Schulz, A., Walker, M., Tovar, G. E. M., Buck, F., Schiestel, T., Widenmeyer, M., Chen, G., Weidenkaff, A. (2019) Untersuchung einer Mikrowellenplasmaquelle für die CO2 Konversion. 19th Symposium on Plasma Technology (PT19), June 17−19, 2019, Cottbus, Germany.

Kistner, I., Wiegers, K., Schulz, A., Walker, M., Tovar, G. E. M. (2019) Investigation of a microwave plasma torch for CO2 gas conversion. DPGFrühjahrstagung, March 17−22, 2019, Munich, Germany.

Kriem, L., Rupp, S., Schließmann, U. (2019) The use of confocal raman microscopy for oral bacteria differentiation. 6th European Congress on Biofilms (EUROBIOFILMS 2019), September 3–6, 2019. Glasgow, UK.

Merli, S., Kistner, I., Schulz, A., Walker, M., Tovar, G. E. M., Buck, F., Schiestel, T., Widenmeyer, M., Chen, G., Weidenkaff, A. (2019) Microwave plasma reactor for CO2 decomposition. The 72nd Gaseous Electronics Conference
(GEC), October 28 − November 1, 2019, College Station, Texas, USA.

Michele, A., Tovar, G. E. M., Southan, A. (2019) Thermally induced cross-linking and decomposition of poly(vinyl alcohol) under influence of p-toluenesulfonic acid. Frontiers in Polymer Science, May 5−8, 2019, Budapest, Hungary.

Nellinger, S., Keller, S., Southan, A., Wittmann, V., Kluger, P. J. (2019) Generation of an azide-modified extracellular matrix by adipose-derived stem cells using metabolic glycoengineering. BMT 2019 – the Biomedical Engineering Congress – the 53rd Annual Conference of the German Society for Biomedical Engineering, September 25−26, 2019, Frankfurt am Main, Germany.

Neumann, U., Becker, M., Frick, K., Derwenskus, F., Bischoff, S. C., Schmid-Staiger, U., Stier, M., Tovar, G. E. M. (2019) MIATEST − Herstellung von Mikroalgenpräparationen und Testung als gesundheitsfördernden Nahrungsstoff für den Menschen sowie als umweltschonendes Pflanzenstärkungsmittel im Weinbau. 4. Statusseminar:
Forschungsprogramm Bioökonomie Baden-Württemberg, January 8, 2019, Stuttgart-Hohenheim, Germany.

Pauly, S., Schmid, B., Schulz, A., Walker, M., Tovar, G. E. M., Baumgärtner, K. (2019) Modeling and study of a remote plasma source for high-rate etching, DPG-Frühjahrstagung, March 17−22, 2019, Munich, Germany.

Ramisch, M., Garland, S., Schmid, B., Ullmann, T. (2019) Formation of turbulent transport in 3D stellarator geometry. DPG-Frühjahrstagung, March 17−22, 2019, Munich, Germany, P18.65.

Schulz, A. (2019) Microwave plasma reactor for CO2 decomposition. KEROGREEN Workshop on plasma catalysis for renewable fuels and chemicals, November 15, 2019, Eindhoven, The Netherlands.

Spindler, L., Rebers, L., Hoch, E., Braun, J., Granse, T., Southan, A., Borchers, K., Weber, A. (2019) Crosslinkable gelatin derivates with high degree of modification and low solution viscosities for simplified processing by spray
drying and inkjet-printing. Controlled Release Society Annual Meeting & Exposition. July 21−24, 2019, Valencia, Spain.

Spindler, L. M., Gruber-Traub, C., Tovar, G. E. M., Weber, A. (2019) Controllable release of biotin through in situ ionic crosslinking and encapsulation in sodium alginate by means of spray drying. Controlled Release Society Annual Meeting & Exposition. July 21−24, 2019, Valencia, Spain.

Spindler, L. M., Gruber-Traub, C., Tovar, G. E. M., Weber, A. (2019) Encapsulation of active ingredients and in situ ionic crosslinking of alginate by means of spray drying. ProMatLeben – Polymere, Doktoranden- und PostDoc-Konferenz, September 3−4, 2019, Berlin, Germany.

Troia, M., Schulz, A., Walker, M., Hirth T. (2019) Vergleich der Barriereeigenschaften von Plasmapolymerisierten HMDSN- und HMDSObasierten Schichten. 19th Symposium on Plasma Technology (PT19), June 17−19, 2019, Cottbus, Germany.

Ullmann, T., Schmid, B., Manz, P., Ramisch, M. (2019) Three-mode coupling under imposed E × B shear. DPG-Frühjahrstagung, March 17−22, 2019, Munich, Germany, P18.66.

Vidal Quintana, A. A., Waelkens, B., Schließmann, U. (2019) Biogas potential analysis on WWTPs in Baden‐Württemberg. 4. Statusseminar: Forschungsprogramm Bioökonomie Baden-Württemberg, January 8, 2019, Stuttgart-Hohenheim, Germany.

Beck, A. (2019) Bioreactor production of the microbial glycolipid mannosylerythritol lipid (MEL) from renewable resources. Biosurfactants Conference, September 25−27, 2019, Stuttgart-Hohenheim, Germany.

Fantz, U., Jelonnek, J., Link, G., Soldatov, S., Walker, M., Schulz, A., Kistner, I., Carbone, E., Hecimovic, A., D'Isa, F. (2019) Conversion of CO2 into addedvalue chemicals like CO using MW plasmas − A collaborative project of KIT/
IGVP/IPP. KEROGREEN Workshop on plasma catalysis for renewable fuels and chemicals, November 15, 2019, Eindhoven, The Netherlands.

Frick, K. (2019) Best practice lab reactors: cultivation conditions, important parameters, sterilisation and inoculation, control and feeding system, sampling and OD/DW determination. Workshop Algal Biotechnology Techniques and Opportunities for the Sustainable Bioeconomy, November 12−13, 2019, Stuttgart, Germany.

Hanke, S., Day, C., Giegerich, T., Igitkhanov, J., Kathage, Y., Luo, X., Varoutis, S., Vazquez Cortes, A., Härtl, T., Busniuk, A., Livshits, A., Merli, S., Schulz, A., Walker, M., Baumgärtner, K., Hofmann, J. (2019) Progress of the R&D programme to develop a metal foil pump for DEMO. 14th International Symposium on Fusion Nuclear Technology, Septermber 22−27, 2019, Budapest, Hungary.

Kasparek, W., Happel, T., Hennequin, P., Höfler, K. (2019) Development of a frequency-comb reflectometer. 31st Joint Russian-German Workshop on ECRH and Gyrotrons, June 3–8, 2019, Lenggries, Germany.

Keller, S., Wittmann, V., Tovar, G. E. M., Southan, A., Bach, M., Kluger, P. J. (2019) Development and characterization of an azide-functional cell-derived extracellular matrix as biomaterial. 30th Annual Conference of the European
Society for Biomaterials (ESB) in tandem with the 26th Annual Conference of the German Society for Biomaterials (DGBM), September 9−13, 2019, Dresden, Germany.

Kistner, I., Schulz, A., Walker, M., Tovar, G. E. M. (2019) Perovskite hollow fibers for oxygen separation in a CO₂ plasma. IPP ITED Ringberg Seminar 2019, April 1−5, 2019, Kreuth, Germany.

Köhn, A., Holzhauer, E., Thomas, M. B., Vann, R. G. L., Leddy, J. B., Holland, L., Maj, O., Guidi, L., Poli, E., Snicker, A., Weber, H., Brookman M. W. (2019) Reduction of microwave beam quality due to plasma density fluctuations
(invited). DPG-Frühjahrstagung, March 17−22, 2019, Munich, Germany, P15.2.

Köhn, A. Holzhauer, E., Thomas, M. B., Vann, R. G. L., Leddy, J. B., Holland, L., Maj, O., Guidi, L., Poli, E., Snicker, A., Weber, H., Brookman, M. W., Gospodchikov, E., Khusainov, T. A., Shalashov, A. G., Durakovic, A., Rasmussen, J. (2019) Reducing microwave beam quality by plasma density variations. 31st Joint Russian-German Workshop on ECRH and Gyrotrons, June 3–8, 2019, Lenggries, Germany.

Lechte, C., Kasparek, W., Plaum, B., Schubert, M., Stober, J. (2019) 3D simulation of the performance of reflector gratings for high power mm waves. 31st Joint Russian-German Workshop on ECRH and Gyrotrons, June 3–8, 2019, Lenggries, Germany.

Merli, S., Schulz, A., Walker, M. (2019) Hochrateabscheidung von Schutzbeschichtungen mit einem Mikrowellenplasma. 14. Thementage Grenz- und Oberflächentechnik und 6. Optik-Kolloquium, 12−14 March 2019,
Zeulenroda-Triebes, Germany.

Merli, S., Schulz, A., Walker, M. (2019) Self-consistent modelling of a linear microwave plasma source. The 72nd Gaseous Electronics Conference (GEC), October 28 − November 1, 2019, College Station, Texas, USA.

Merli, S., Youssefi, R., Maier, J., Glocker, B., Schulz, A., Walker, M. (2019) Flexible Plasmazündung von Kohlekraftwerken für die Energiewende. 19th Symposium on Plasma Technology (PT19), June 17−19, 2019, Cottbus,
Germany.

Oraby, A. (2019) Cellobioselipide − neue mikrobielle Biotenside. SEPAWA Kongress, October, 23−25, 2019, Berlin, Germany.

Pauly, S., Schulz, A., Walker, M., Tovar, G. E. M., Balk, M., Schneider, J., Baumgärtner, K.-M. (2019) Modelling and study of a microwave plasma source for high-rate etching. 17th International Conference on Microwave and High Frequency Heating, September 9−12, 2019, Valencia, Spain.

Plaum, B., Schubert, M., Stober, J., Zeitler, A., Moro, A., Bruschi, A. (2019) Design of reflector gratings for advanced ecrh scenarios. 31st Joint Russian- German Workshop on ECRH and Gyrotrons, June 3–8, 2019, Lenggries, Germany.

Plaum, B., Schubert, M., Stober, J., Zeitler, A., Moro, A., Bruschi, A., Fanale F. (2019) Development of holographic reflector gratings for advanced ECRH heating and ignition scenarios. US-EU-JPN RF Heating Technology Workshop, September 9−12, 2019, Freiburg, Germany.

Reichsöllner, R., Rebers, L., Southan, A., Baudis, S. (2019) Physical and chemical characterization during the photocuring process of gelatin hydrogels. New Frontiers in Biofabrication: From Biomolecules to Tissues
and Organs, September 17–18, 2019, Leuven, Belgium.

Schulz, A. (2019) Dissoziation von CO2 in einem Mikrowellenplasma. V2019 Vakuum und Plasma, October 8−10, 2019, Dresden, Germany.

Schulz, A. (2019) Plasma-induzierte CO2-Konversion (PiCK). P2X-Tag des Kopernikus-Projekt für die Energiewende P2X: Erforschung, Validierung und Implementierung von Power-to-X Konzepten, January 15−16, 2019, Frankfurt
am Main, Germany.

Schulz, A., Kistner, I., Walker, M., Rösler, C., Buck, F., Schiestel, T., Tovar, G. E. M. (2019) Mikrowellenplasmabrenner für die Wandlung regenerativer elektrischer in chemische Energie. 19. Fachtagung für Plasmatechnologie, June 17−19, 2019, Cottbus, Germany.

Schulz, A., Walker, M. (2019) Status on microwave plasma assisted NOx production. PLASMANOX workshop, August 21−22, 2019, Svene, Norway.

Southan, A., Borchers, K., Tovar, G. E. M. (2019) Strukturierte biokompatible und funktionale Hydrogele mittels 3D-Druck biofunktionaler Tinten mit einstellbaren Eigenschaften. Chemie hilft 3D-Druck, February, 18−19, 2019,
Frankfurt am Main, Germany.

Spindler, L. M., Gruber-Traub, C., Vogelwaid, J., Tovar, G. E. M., Weber, A. (2019) Concurrent crosslinking and encapsulation of biotin in sodium alginate by means of spray drying. Controlled Release Society German Chapter
Annual Meeting, March 7−8, 2019, Leipzig, Germany.

Tovar, G.E.M. (2019) Strukturierte biokompatible und funktionale Hydrogele mittels 3D-Druck biofunktionaler Tinten mit einstellbaren Eigenschaften. Chemie hilft 3D-Druck, February 18-19, Frankfurt am Main, Germany.

Troia, M., Schulz, A., Walker, M. (2019) Non-destructive test for the analysis of defects in thin barrier films. 14. Thementage Grenz- und Oberflächentechnik und 6. Optik-Kolloquium, March 12−14, 2019, Zeulenroda-Triebes, Germany.

Weber, A., Rebers, L., Hoch, E., Borchers, K., Stier, S., Schönhaar, V. (2019) Gedruckte Biomaterialien am Beispiel von Hydrogelen mit zonal unterschiedlichen Quellbarkeiten, Werkstoffwoche, September 18−19, 2019, Dresden, Germany.

Yeh, Y.-C. (2019) Modelling of microalgae cultivation: indoor and outdoor conditions, important parameters, strict models vs. data-driven models, from modeling to control. Workshop Algal Biotechnology Techniques and Opportunities for the Sustainable Bioeconomy, November 12−13, 2019, Stuttgart, Germany.

Bantel, Y. (2019) Molekulare und funktionelle Charakterisierung der Virulenzfaktoren Rbe1p und Rbt4p in Candida albians, University of Stuttgart. http://dx.doi.org/10.18419/opus-10679

Elter, T. (2019) Fermentative Herstellung spezifischer Gibberelline mit Fusarium fujikuroi, University of Stuttgart. http://dx.doi.org/10.18419/opus-10610

Fischer, S. (2019) Entwicklung eines molekularbiologischen Assays zum Nachweis von Tumormarkern und dessen Integration in ein mikrofluidisches System, University of Stuttgart. http://dx.doi.org/10.18419/opus-10472

Foshag, D. (2019) Optimization of cell-free protein synthesis by proteomics and metabolic engineering of Escherichia coli A 19, University of Stuttgart. http://dx.doi.org/10.18419/opus-10775

Garland, S. (2019) Investigation into the influence of magnetic field structure on the dynamical and spatial proberties of plasma edge turbulence in the stellarator TJ-K, University of Stuttgart.

Haußmann, H. (2019) Untersuchung des Zellaufschlusses und der Gewinnung von Proteinen mit funktionellen Eigenschaften am Beispiel der Mikroalgen Chlorella sorokiniana, Phaeodactylum tricornutum und Chlamydomonas
reinhardtii, University of Stuttgart.

Jesswein, I. (2019) Kontinuierliche Tauchbeschichtung und anwendungstechnische Charakterisierung von porösen Hohlfasermembranen, University of Stuttgart. ISBN: 978-3-8396-1459-4

König, L. (2019) Experimentelle Untersuchung der elektrophoretischen Mobilität gelöster Metalle der Seltenen Erden in der Free-Flow Elektrophorese, University of Stuttgart. http://dx.doi.org/10.18419/opus-10723

Marques da Silveira e Santos, D. (2019) The multifaceted life of the herpesviral pUL31 – trafficking from replication compartments to the inner nuclear membrane for capsid nuclear egress, University of Stuttgart.

Rais, D. P. (2019) Identifizierung und Charakterisierung bakterieller Ligninmodifizierender Enzyme, University of Stuttgart.

Schuster, F. (2019) Mehrkomponenten-Inkjet-Druck von chemisch reaktiven Tinten zur Erzeugung von Polyurethanschäumen. University of Stuttgart. ISBN: 978-3-8396-1530-0

Troia, M. (2019) Barrier properties and analysis of defects of plasma polymerized hexamethyldisilazane-based films, University of Stuttgart.

Verges, M. (2019) Verfahrenstechnische Untersuchung des Ethanol-Wasser-Organosolvaufschlusses von Lignocellulose in einer integrierten Pilotanlage, University of Stuttgart. http://dx.doi.org/10.18419/opus-10819

Walz, M. (2019) Untersuchung und Charakterisierung von chemisch modifiziertem Inulin zur Verwendung als Verkapselungsmaterial für die Sprühtrocknung, University of Stuttgart. http://publica.fraunhofer.de/documents/N-569771.html

Alexiadis, N. (2019) Entwicklung neuartiger Oberflächenbeschichtungen für sauerstoffseparierende Kapillarmembranen des Systems (La0,6Ca0,4)0,99(Co0,8Fe0,2)O3-δ, University of Stuttgart, bachelor thesis.

Dikmen, B. (2019) Title protected, University of Stuttgart, Seminar paper.

Göhring, C. M. (2019) Untersuchung der biologischen, chemischen und mechanischen Eigenschaften von clickECM-PEG-DA-Hybrid-Hydrogelen, University of Stuttgart, seminar paper.

Jansen, F. (2019) Development of a 3D-printed low-cart video laryngascope for low and middle income countries, University of Stuttgart, master thesis.

Keller, C. (2019) Untersuchung der Musterbildung eines Transmembranproteins unter Einfluss von Material- oder
Grenzflächeninteraktionen, University of Stuttgart, master thesis.

Kurmann, J. (2019) Title protected, University of Stuttgart, bachelor thesis.

Luft, D. (2019) Rotationsbeschichtung von Siliziumwafern mit Benzophenonmodifiziertem Polyvinylalkohol als Modellsystem für Befeuchtermembranen, University of Stuttgart, master thesis.

Maheswaran, S. (2019) Evaluation stent-induzierter Gefäßdeformation anhand von 3D-getrackten Modellen, University of Stuttgart, master thesis.

Müller, P. (2019) Title protected, University of Stuttgart, master thesis.

Paschkowski, P. (2019) Entwicklung von Hohlfaser-Kompositmembranen für die Be- und Entfeuchtung, University of Stuttgart, master thesis.

Pfriender, L. (2019) Steigerung der Synthese der extrazellulären Matrix von in Hydrogelen aus Methacryl-modifizierter Gelatine verkapselten porcinen Chondrozyten, University of Stuttgart, seminar paper.

Pfriender, L. (2019) Adsorptions- und Freisetzungsverhalten von Diclofenac und Metoprolol an Gelatine-basierten Hydrogelen, University of Stuttgart, master thesis.

Plicht, C. (2019) Darstellung und Optimierung von Doppelnetzwerk-Hydrogelen, Hochschule Bonn-Rhein-Sieg, bachelor thesis.

Quirin, S. (2019) Title protected, University of Tübingen; University of Stuttgart, bachelor thesis.

Rauleder, R. (2019) Oberflächencharakterisierung von Polymethylacrylarbasierten Folien mit gezielter Oberflächenfunktionalisierung, Reutlingen University, bachelor thesis.

Regett, S. (2019) Zonale Hydrogele aus Methacryl-modifizierter Gelatine mit einem Glycosaminoglycan-Gradienten für die 3D-Kultivierung von porcinen Chondrozyten, University of Stuttgart, master thesis.

Rehm, T. (2019) Etablierung eines humanen oralen 3D Wangenschleimhautmodells, University of Stuttgart, master thesis.

Riethmüller, L. (2019) Herstellung und Charakterisierung bezüglich Vernetzungseffizienz und thermischen Eigenschaften von Divinylsulfonvernetzten Polyvinylalkohol-Hydrogelen, University of Stuttgart, seminar paper.

Rühle, S. (2019) Integration von Immunzellen in ein orales 3D-Schleimhautmodell für Wirt-Pathogen-Untersuchungen, University of Stuttgart, bachelor thesis.

Salwik, F. (2019) Analyse und Steuerung eines dynamischen Flockenbettes nach einer elektrophysikalischen Fällung (EpF), University of Stuttgart, master thesis.

Schmieder, K. (2019) Polyelektrolyt-Hydrogele als Beschichtungen für integrierte Zwei-Moden-Interferometer auf einer Siliziumplattform zur Detektion von Diclofenac und Metoprolol, University of Stuttgart, master thesis.

Schöck, R. (2019) Charakterisierung und Optimierung beschichteter keramischer Hohlfasermembranen für die Blutfiltration, University of Stuttgart, master thesis.

Schuler, C. (2019) Title protected, University of Stuttgart, master thesis.

Seitz, M. (2019) Title protected, University of Tübingen; University of Stuttgart, bachelor thesis.

 Singer, G. (2019) Anreicherung von Chrysolaminarin in Paeodactylum tricornutum UTEX 640 unter Nährstoffmangelbedingungen, University of Stuttgart, master thesis.

Sritharan, J. (2019) Darstellung von gelatinebasierten Doppelnetzwerk-Hydrogelen mittels Diels-Alder-Cycloaddition und die Untersuchung des Einflusses der Gelzusammensetzung auf die mechanische Stabilität, University of Stuttgart, master thesis.

Stöckerl, T. (2019) Title protected, University of Stuttgart, seminar paper.

Stuhlmüller, M. (2019) Development of a measurement methodology for the mechanical characterization of calciumalginate/polyacrylamide double network hydrogels with multivariate analysis of the effects of various gel
compositions, University of Stuttgart, master thesis.

Trafela, A. (2019) Untersuchung geeigneter Prozessparameter zur Optimierung der Fucoxanthin- und Laminarinproduktion in der Kieselalge Phaeodactylum tricornutum, University of Stuttgart, master thesis.

Uhl, A. (2019) Kovalent gebundene Hydrogelbeschichtungen auf Silizium, University of Stuttgart, seminar paper.

Wörgötter, K. (2019) Untersuchung zur Generierung und Charakterisierung einer Beschichtung aus Azid-modifizierter extrazellulärer Matrix, University of Stuttgart, master thesis.