Publikationen

Jahresberichte, Peer-reviewed Publikationen, Abschlussarbeiten etc.

Peer reviewed Publikationen ab 2020

  1. 2023

    1. B. Plaum, „Estimation of the Effects of Spurious Modes in Linear Microwave Systems Using a Monte Carlo Algorithm“, IEEE Journal of Microwaves, Bd. 3, Nr. 3, Art. Nr. 3, Juli 2023, doi: 10.1109/JMW.2023.3283152.
    2. L. A. Holland, A. Köhn-Seemann, und R. G. L. Vann, „Parametric dependence of microwave beam broadening by plasma density turbulence“, Nuclear Fusion, Mai 2023, doi: 10.1088/1741-4326/acc25e.
    3. A. Frank u. a., „Impact of the turbulence wavenumber spectrum and probing beam geometry on Doppler reflectometry perpendicular velocity measurements“, Plasma Physics and Controlled Fusion, Bd. 65, Nr. 6, Art. Nr. 6, Mai 2023, doi: 10.1088/1361-6587/accd1a.
    4. M. W. Brookman u. a., „Broadening of microwave heating beams in the DIII-D tokamak by edge turbulence“, Nuclear Fusion, Bd. 63, Nr. 4, Art. Nr. 4, März 2023, doi: 10.1088/1741-4326/acbb8e.
    5. P. Reichle u. a., „Volatile Lubricants Injected Through Laser Drilled Micro Holes Enable Efficiently Hydrocarbon-Free Lubrication for Deep Drawing Processes“, International Journal of Precision Engineering and Manufacturing-Green Technology, Feb. 2023, doi: 10.1007/s40684-023-00505-8.
    6. A. Oraby u. a., „Fermentation and recovery of cellobiose lipids using foam fractionation“, Discover Chemical Engineering, Bd. 3, Nr. 1, Art. Nr. 1, Jan. 2023, doi: 10.1007/s43938-022-00015-0.
    7. A. Köhn-Seemann, B. E. Eliasson, S. J. Freethy, L. A. Holland, und R. G. L. Vann, „Benchmarking full-wave codes for studying the O-SX mode conversion in MAST Upgrade“, in EPJ Web of Conferences, in EPJ Web of Conferences, vol. 277. 2023, S. 01010. doi: 10.1051/epjconf/202327701010.
    8. A. J. Coelho u. a., „Validation of GBS plasma turbulence simulation of the TJ-K stellarator“, Plasma Phys. Control. Fusion, Bd. 65, Nr. 8, Art. Nr. 8, 2023, doi: 10.1088/1361-6587/ace4f3.
    9. D. Wagner u. a., „Single- and Two-Frequency Sub-THz Waveguide Notch Filters With Rejection Frequencies Within and Beyond the Passband“, IEEE Transactions on Microwave Theory and Techniques, Bd. 71, Nr. 6, Art. Nr. 6, 2023, doi: 10.1109/TMTT.2023.3234103.
    10. T. Wilson u. a., „Electron Bernstein Wave (EBW) Current Drive Profiles and Efficiency for STEP“, in EPJ Web of Conferences, E. Poli, Y. Liu, und V. Udintsev, Hrsg., in EPJ Web of Conferences, vol. 277. 2023, S. 01011. doi: 10.1051/epjconf/202327701011.
    11. S. Freethy u. a., „Microwave Current Drive for STEP and MAST Upgrade“, in EPJ Web of Conferences, E. Poli, Y. Liu, und V. Udintsev, Hrsg., in EPJ Web of Conferences, vol. 277. 2023, S. 04001. doi: 10.1051/epjconf/202327704001.
    12. B. Plaum, M. Preynas, und M. Choe, „Calculations for the optical system for the first ITER plasma“, EPJ Web of Conferences, Bd. 277, S. 01005, 2023, doi: 10.1051/epjconf/202327701005.
    13. A. Hentrich, „Simulation and reflectivity measurements of the ITER first plasma beam dump material“, EPJ Web of Conferences, Bd. 277, S. 02009, 2023, doi: 10.1051/epjconf/202327702009.
    14. N. Müller, P. Manz, und M. Ramisch, „Nondiffusive particle transport in the stellarator experiment TJ-K“, Phys. Plasmas, Bd. 30, Nr. 9, Art. Nr. 9, 2023, doi: 10.1063/5.0156125.
  2. 2022

    1. K. Bosson, P. Marcasuzaa, A. Bousquet, G. E. M. Tovar, V. Atanasov, und L. Billon, „PentaFluoroStyrene-based block copolymers controlled self-assembly pattern: A platform paving the way to functional block copolymers“, European Polymer Journal, Bd. 179, S. 111560, Okt. 2022, doi: 10.1016/j.eurpolymj.2022.111560.
    2. A. Köhn-Seemann u. a., „Plasma electron acceleration in a non-resonant microwave heating scheme below the electron cyclotron frequency“, New Journal of Physics, Juni 2022, doi: 10.1088/1367-2630/ac747a.
    3. A. Hentrich, V. M. Garcia, A. Killinger, B. Plaum, C. Lechte, und G. E. M. Tovar, „Resonant Atmospheric Plasma-Sprayed Ceramic Layers Effectively absorb Microwaves at 170 GHz“, Journal of Infrared, Millimeter, and Terahertz Waves, Bd. 43, Nr. 5–6, Art. Nr. 5–6, Juni 2022, doi: 10.1007/S10762-022-00861-7.
    4. A. Oraby, S. Rupp, und S. Zibek, „Techno-Economic Analysis as a Driver for Optimisation of Cellobiose Lipid Fermentation and Purification“, Frontiers in Bioengineering and Biotechnology, Bd. 10, Juni 2022, doi: 10.3389/fbioe.2022.913351.
    5. A. Guarnieri u. a., „Antimicrobial properties of chitosan from different developmental stages of the bioconverter insect Hermetia illucens“, Scientific Reports, Bd. 12, Nr. 1, Art. Nr. 1, Mai 2022, doi: 10.1038/s41598-022-12150-3.
    6. A. Oraby, I. Weickardt, und S. Zibek, „Foam fractionation methods in aerobic fermentation processes“, Biotechnology and Bioengineering, Bd. 119, Nr. 7, Art. Nr. 7, Apr. 2022, doi: 10.1002/bit.28102.
    7. T. Hahn u. a., „Purification of Chitin from Pupal Exuviae of the Black Soldier Fly“, Waste and Biomass Valorization, Bd. 13, Nr. 4, Art. Nr. 4, Apr. 2022, doi: 10.1007/s12649-021-01645-1.
    8. G. Reichardt u. a., „Friction and Wear Behavior of Deep Drawing Tools Using Volatile Lubricants Injected Through Laser-Drilled Micro-Holes“, JOM, Bd. 74, Nr. 3, Art. Nr. 3, März 2022, doi: 10.1007/s11837-021-05028-8.
    9. D. Wagner u. a., „Single- and Two-Frequency Sub-THz Notch Filters with Rejection Frequencies Within and Beyond the Pass Band“, IEEE Transactions on Microwave Theory and Techniques, 2022.
    10. A. Beck, F. Vogt, L. Hägele, S. Rupp, und S. Zibek, Optimization and kinetic modeling of a fed-batch fermentation for mannosylerythritol lipids (MEL) production with moesziomyces aphidis. Universität Stuttgart, 2022. doi: 10.18419/OPUS-12230.
    11. A.-K. Briem, L. Bippus, A. Oraby, P. Noll, S. Zibek, und S. Albrecht, „Environmental Impacts of Biosurfactants from a Life Cycle Perspective: A Systematic Literature Review“, in Advances in Biochemical Engineering/Biotechnology, in Advances in Biochemical Engineering/Biotechnology. , Springer Berlin Heidelberg, 2022. doi: 10.1007/10_2021_194.
  3. 2021

    1. F. Fanale u. a., „Design validation of in-vessel mirrors and beam dump for first plasma operations in ITER“, Fusion Engineering and Design, Bd. 172, S. 112717, Nov. 2021, doi: 10.1016/j.fusengdes.2021.112717.
    2. J. Lips, S. Heuraux, C. Lechte, und B. Plaum, „On frequency-independent horn antenna design for plasma positioning reflectometers, from simulation to prototype testing“, Journal of Instrumentation, Bd. 16, Nr. 07, Art. Nr. 07, Juli 2021, doi: 10.1088/1748-0221/16/07/P07040.
    3. A. Beck u. a., „Novel mannosylerythritol lipid biosurfactant structures from castor oil revealed by advanced structure analysis“, Journal of Industrial Microbiology and Biotechnology, Bd. 48, Nr. 7–8, Art. Nr. 7–8, Juli 2021, doi: 10.1093/jimb/kuab042.
    4. S. B. Lorentzen u. a., „Genomic and Proteomic Study of Andreprevotia ripae Isolated from an Anthill Reveals an Extensive Repertoire of Chitinolytic Enzymes“, Journal of Proteome Research, Bd. 20, Nr. 8, Art. Nr. 8, Juni 2021, doi: 10.1021/acs.jproteome.1c00358.
    5. T. Ullmann, B. Schmid, P. Manz, G. E. M. Tovar, und M. Ramisch, „Turbulent energy transfer into zonal flows from the weak to the strong flow shear regime in the stellarator TJ-K“, Physics of Plasmas, Bd. 28, Nr. 5, Art. Nr. 5, Mai 2021, doi: 10.1063/5.0039959.
    6. Y. Corre u. a., „Thermographic reconstruction of heat load on the first wall of Wendelstein 7-X due to ECRH shine-through power“, Bd. 61, Nr. 6, Art. Nr. 6, Apr. 2021, doi: 10.1088/1741-4326/abebea.
    7. M. W. Brookman u. a., „Resolving ECRH deposition broadening due to edge turbulence in DIII-D“, Physics of Plasmas, Apr. 2021, doi: 10.1063/1.5140992.
    8. G. Reichardt u. a., „Investigations on the Process Stability of Dry Deep Drawing with Volatile Lubricants Injected Through Laser-Drilled Microholes“, TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series., 2021, doi: https://doi.org/10.1007/978-3-030-65261-6_21.
  4. 2020

    1. T. Ullmann, B. Schmid, P. Manz, B. van Milligen, G. E. M. Tovar, und M. Ramisch, „Experimental observation of resonance manifold shrinking under zonal flow shear“, Physical Review E, Bd. 102, Nr. 6, Art. Nr. 6, Dez. 2020, doi: 10.1103/physreve.102.063201.
    2. A. Oraby, N. Werner, Z. Sungur, und S. Zibek, „Factors Affecting the Synthesis of Cellobiose Lipids by Sporisorium scitamineum“, Frontiers in Bioengineering and Biotechnology, Bd. 8, Nov. 2020, doi: 10.3389/fbioe.2020.555647.
    3. A. Gubelt, L. Blaschke, T. Hahn, S. Rupp, T. Hirth, und S. Zibek, „Comparison of Different Lactobacilli Regarding Substrate Utilization and Their Tolerance Towards Lignocellulose Degradation Products“, Current Microbiology, Bd. 77, Nr. 10, Art. Nr. 10, Okt. 2020, doi: 10.1007/s00284-020-02131-y.
    4. A. Beck und S. Zibek, „Growth Behavior of Selected Ustilaginaceae Fungi Used for Mannosylerythritol Lipid (MEL) Biosurfactant Production – Evaluation of a Defined Culture Medium“, Frontiers in Bioengineering and Biotechnology, Bd. 8, Okt. 2020, doi: 10.3389/fbioe.2020.555280.
    5. T. Hahn u. a., „Determining different impact factors on the xylonic acid production using Gluconobacter oxydans DSM 2343“, Process Biochemistry, Bd. 94, S. 172--179, Juli 2020, doi: 10.1016/j.procbio.2020.04.011.
    6. S. Garland, P. Manz, und M. Ramisch, „The influence of magnetic field curvature on intermittency in drift-wave turbulence in the stellarator TJ-K“, Physics of Plasmas, Bd. 27, Nr. 5, Art. Nr. 5, Mai 2020, doi: 10.1063/5.0004963.
    7. D. Moseev u. a., „Collective Thomson Scattering Diagnostic for Wendelstein 7-X at 175 GHz“, Journal of Instrumentation, Bd. 15, Nr. 05, Art. Nr. 05, Mai 2020, doi: 10.1088/1748-0221/15/05/c05035.
    8. T. Jorissen, A. Oraby, G. Recke, und S. Zibek, „A systematic analysis of economic evaluation studies of second-generation biorefineries providing chemicals by applying biotechnological processes“, Biofuels, Bioproducts and Biorefining, Bd. 14, Nr. 5, Art. Nr. 5, Apr. 2020, doi: 10.1002/bbb.2102.
    9. Y. Vainshtein u. a., „Draft Genome Sequence of Andreprevotia sp. Strain IGB-42, a Chitinolytic Bacterium Isolated from a Soil Sample of an Anthill in Stuttgart, Germany“, Microbiology Resource Announcements, Bd. 9, Nr. 10, Art. Nr. 10, März 2020, doi: 10.1128/mra.01454-19.
    10. T. Hahn, A. Roth, R. Ji, E. Schmitt, und S. Zibek, „Chitosan production with larval exoskeletons derived from the insect protein production“, Journal of Biotechnology, Bd. 310, S. 62--67, Feb. 2020, doi: 10.1016/j.jbiotec.2019.12.015.
    11. C. Valotteau u. a., „Antibacterial properties of glycosylated surfaces: variation of the glucosidal moiety and fatty acid conformation of grafted microbial glycolipids“, Mol. Syst. Des. Eng., Bd. 5, Nr. 7, Art. Nr. 7, 2020, doi: 10.1039/D0ME00059K.
    12. O. L. Krutkin u. a., „Investigation of nonlinear effects in Doppler reflectometry using full-wave synthetic diagnostics“, Plasma Science and Technology, Bd. 22, Nr. 6, Art. Nr. 6, 2020, doi: 10.1088/2058-6272/ab5c28.
    13. V. V. Bulanin u. a., „Full-Wave Modeling of Doppler Backscattering from Filaments“, Plasma Physics Reports, Bd. 46, S. 490–495, 2020, doi: 10.1134/S1063780X20050025.
    14. C. Lechte, G. D. Conway, T. Görler, T. Happel, und the ASDEX Upgrade Team, „Fullwave Doppler Reflectometry Simulations for Density Turbulence Spectra in ASDEX Upgrade Using GENE and IPF-FD3D“, Plasma Sci. Technol., Nr. 22, Art. Nr. 22, 2020, doi: 10.1088/2058-6272/ab7ce8.

Die folgenden Seiten enthalten die Publikationen bis 2019 vom IGVP und den Vorgängerinstituten IGVT und IPF aus den Jahren:

Zum Seitenanfang